1st Stage 5 Micron Sediment Filter 2.75″x9.75″
Sediment filter to trap particles, including rust and calcium carbonate
2nd Stage 5 Micron Carbon Block Filter 2.75″x9.75″
Carbon filters are most effective at removing chlorine, sediment, and volatile organic compounds (VOCs) from water.
3rd Stage Reverse Osmosis Membrane 50 GPD
4th Stage In Carbon Post Filter
For taste & Odor regulation
5th stage UV 1GPM
Ultraviolet water purification lamps produce UV-C or “germicidal UV,” radiation of much greater intensity than sunlight. Almost all of a UV lamp’s output is concentrated in the 254 nanometers (nm) region in order to take full advantage of the germicidal properties of this wavelength. Most ultraviolet purification systems are combined with various forms of filtration, as UV light is only capable of killing microorganisms such as bacteria, viruses, molds, algae, yeast, and oocysts like cryptosporidium and giardia. UV light generally has no impact on chlorine, VOCs, heavy metals, and other chemical contaminants. Nevertheless, it is probably the most cost effective and efficient technology available to homeowners to eliminate a wide range of biological contaminants from their water supply. Recent testing has also shown that UV can be effective at destroying certain VOC’s, although we would not specifically recommend the technology for VOC reduction. UV water treatment offers many advantages over other forms of water treatment for micobiological contaminants. Most importantly, it does not introduce any chemicals to the water, it produces no bi-products, and it does not alter the taste, pH, or other properties of the water. Accordingly, in addition to producing safe drinking water, it is not harmful to your plumbing and septic system.
THIS UNIT COMES WITH A PERMEATE PUMP
Aquatec ERP 500
FEATURES AND BENEFITS OF PERMEATE PUMP
• Requires no electricity, powered by energy
The original Permeate Pump (ERP500) is a simple, yet revolutionary, device. Powered only by the hydraulic energy of brine water usually lost to the drain (i.e. no electricity required), the Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure. These pumps dramatically improve the efficiency of R.O. water production, reducing waste water by up to 80%. . Permeate Pumps can also bring storage tanks up to line pressure and then shut the system down when these tanks reach capacity, eliminating the need for a hydraulic shut-off valve. Other benefits include higher delivery pressures, faster R.O. water production, superior water quality, and extended filter/membrane life.
From brine water
• Improves recovery rates by as much as 400%
• Reduces waste water by as much as 80%
• Enhances contaminant rejection
• Ideal for membranes rated from 10-50 GPD
• Effective for inlet water pressure as low as 30 psi
• Increases membrane life, lowers “TDS creep”
• Fills product tank up to 4 times more rapidly
• NSF approved (Standard 58)
This system also comes with the following:
1. Reverse Osmosis storage tank. 3.2G with storage capacity of 2.8 gallon 9″ x 15″
2. Reverse Osmosis faucet
3. Feed water saddle valve.
4. Saddle drain valve.
5. Housing Wrench. (random color)
6. Check valve on the membrane product water side
7. Color code tubing for easy installation
There are no reviews yet.