100 GPD – 6 Stage Reverse Osmosis Water Filtration System + Permeate Pump, UV, Anti-scaling RO Filters for WELL WATER

Description

AQUA TRUE BLUE WELL WATER REVERSE OSMOSIS WATER SYSTEM WITH PERMEATE PUMP, UV AND SCALE REDUCTION FILTER.

This is a 6 Stage System that includes the following:

RO Unit

1st stage Sediment Filter Cartridge .

Remove Sediment Rust From the Water

2nd stage Anti-Scaling phosphate / GAC Water Filter Cartridge

3rd Stage Carbon Block

4th Stage Reverse Osmosis Membrane 100 GPD

5th Stage GAC inline Water Filter 2″ x 10″

6th UV

Ultraviolet water purification systems are used in many applications that includes home/residential (both well water and municipal water supplies), commercial, and industrial. Here is a list of several applications where the power of UV water sterilizers are commonly used to treat and protect the water supply for contaminates such as bacteria and viruses. Applications include private wells, campgrounds, hotels, bottlers, aquaculture, hospitals, food, cottages, restaurants, breweries, water systems, laboratories, marine, pharmaceutical, dairies and many other applications.

TYPICAL REJECTION CHARACTERISTICS OF R.O. MEMBRANES
Elements and the Percent R.O. Membranes will remove

Sodium  85 – 94%
Sulfate  96 – 98%
Calcium 94 – 98%
Potassium  85 – 95%
Nitrate  60 –75%
Iron  94 – 98%
Zinc  95 – 98%
Mercury 95 – 98%
Selenium  94 – 96%
Phosphate  96 – 98%
Lead  95 – 98%
Arsenic 92 – 96%
Magnesium 94 – 98%
Nickel  96 – 98%
Fluoride  85 – 92%
Manganese  94 – 98%
Cadmium  95 – 98%
Barium  95 – 98%
Cyanide  84 – 92%
Chloride 85 – 92%

% may vary based on membrane type water pressure, temperature & TDS

This unit also comes with a Permeate Pump

A typical reverse osmosis system utilizes an automatic shut-off valve (ASO) that stops the RO system from producing water when the holding tank reaches 50%-67% of the incoming water pressure. As the holding tank gets close to being full, the quality of the water produced by the system begins to diminish, as well as sending more water down the drain due to the increasing back pressure from the holding tank.

When a permeate pump is installed, the RO membrane is isolated from this back pressure and allows the RO membrane to operate with up to 85% of the incoming water pressure, even when the holding tank is nearly full. This dramatically improves the efficiency of the membrane and overall quality of your water, as well as increasing the pressure and related volume of stored water in the holding tank.

How a Reverse Osmosis Permeate Pump Works

Permeate Pumps for a reverse osmosis system are simple, yet revolutionary devices that use the energy of the water going to the drain as leverage to push the purified water into the holding tank. “Permeate” is a technical term for the purified water that is produced through the reverse osmosis membrane. The water that is sent down the drain after rinsing the membrane is called the “Brine.” This device does not require any electricity because the pump is using hydraulic energy that normally goes to the drain unused. By using a permeate pump, the pump isolates the tank from the membrane and lets the membrane perform as though it were in an atmospheric tank system.